---
title: First Time Setup
slug: scenario/first-time-setup
docTags: 
createdAt: 2024-10-02T18:57:50.793Z
---

When unboxing and using CinCraft Scenario for the first time, an initial “First time setup” is required. The first-time setup does the following actions:

- Configure internet connectivity 
- Download and install any mandatory software updates 
- Check for any optional software updates 
- Register the CinCraft Origin hardware with a CinCraft account 

Registering the Origin with a CinCraft account is a requirement for licensing the system and must be done if intending to use the system in a production environment.

:::hint{type="warning"}
Hardware Registration can be skipped, this will allow the user to use the system in reduced mode. Upon restarting the Origin, the user will be invited to conduct the Hardware Registration again.
:::

This section describes the first-time setup and hardware registration. 

**As a pre-requisite ensure that a CinCraft account has been created and that you have the login details required**

[https://www.cincraft.zeiss.com](https://cincraft.zeiss.com/us/home)

::::WorkflowBlock
:::WorkflowBlockItem
Press “<font color="#0f2db3">**Start Initial Setup**</font>” to begin the Hardware Registration process&#x20;

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/vsOka0es_UfVBFz_HXjjn_image.png)
:::

:::WorkflowBlockItem
It is mandatory to have an active connection to the internet, from the subsequent page, connect a wired internet connection into the LAN port of the Origin, or alternatively enter WIFI credentials via the “Network Configuration” button

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/_NtQcfvybl1rho8-y6Spf_image.png)
:::

:::WorkflowBlockItem
Once an active internet connection is detected then you will be able to proceed to the next step.&#x20;

The CinCraft system will check for any updates, some updates are mandatory, and these are unable to be skipped

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/k1qhyZ00Uai5UA3_0sJqT_image.png)
:::

:::WorkflowBlockItem
Once any optional or mandatory updates have been downloaded then you will be able to proceed to the next step.&#x20;

To begin the hardware registration process, click the “<font color="#0f2db3">**Start Registration**</font>” button

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/l7-W8f22VJwHFFyssyAwt_image.png)
:::

:::WorkflowBlockItem
This will display a 6 digit “<font color="#0f2db3">**Registration Code**</font>” and instructions to log into your CinCraft Portal account from another device

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/UVBNkNVjnUOsdVICWTLap_image.png)
:::

:::WorkflowBlockItem
On a separate device, navigate to **[cincraft.zeiss.com](https://cincraft.zeiss.com)** and log into your CinCraft account

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/u8T3AHV0uEdgKmbwLSwVW_image.png)
:::

:::WorkflowBlockItem
From the panel on the left-hand side, select “<font color="#0f2db3">**Device Registration**</font>” page from the Scenario section

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/C3RDj8gqTYQ4UbqQOwtek_image.png)
:::

:::WorkflowBlockItem
On this page:

- Enter the 6-digit registration code&#x20;
- Optionally give your system a name. Naming a system is not mandatory but can help with identifying a system when multiple hardware is attached to a single CinCraft account&#x20;
- Press “<font color="#0f2db3">**Register Now**</font>”
:::

:::WorkflowBlockItem
The system will now bind the Origin to the CinCraft account. Once the hardware has been registered, CinCraft Scenario will report this as being completed successfully

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/LT6uzYf0xjsmQc27gljZl_image.png)
:::

:::WorkflowBlockItem
Additionally, the device can now be seen on the “Device and License Management” tab of the CinCraft Portal

![](https://api.archbee.com/api/optimize/Qn0sdcVrDcDbwMFmH0oYn/VemOI2TrSAuJW9J0YaMC0_image.png)
:::
::::

At this stage, the first-time setup process is complete, and you can continue setting up and using the system